The orange light blinking on a Canon printer +1-801-878-6858 is your printer’s way of signaling a specific problem. Whether it's blinking continuously or blinking a set number of times in a loop, the blinking pattern corresponds to an error that needs to be addressed before printing can resume.

👉👉Click Here For Live Chat With Canon

Understanding the cause of the canon printer orange light blinking +1-801-878-6858 and how to fix it is essential to getting your printer back in working order. This guide covers the most common blinking codes and solutions across various Canon printer models like PIXMA, MAXIFY, and imageCLASS.

Why Is the Orange Light Blinking on My Canon Printer?

Canon printers use LED indicators—typically orange or amber—to alert users of issues. The light may blink a certain number of times (e.g., 2 times, 4 times, 7 times) in a repeating cycle. Each pattern refers to a specific error or warning.

Here are the most common reasons canon printer orange light blinking +1-801-878-6858:

1. Low or empty ink cartridges

2. Improper cartridge installation

3. Paper jam or paper feed issues

4. Print head problems

5. Cover not closed properly

6. Waste ink absorber full

7. General hardware malfunction

Step-by-Step Solutions Based on Blink Count

🔁 1 Blink – Paper Tray Empty or Misaligned

Cause: The printer is out of paper or the paper tray is not correctly inserted.

Solution:

1. Load paper into the tray.

2. Ensure the paper is aligned properly.

3. Reinsert the tray securely.

4. Press the Stop/Reset or Resume button to clear the error.

🔁 2 Blinks – Paper Jam or Paper Feed Error

Cause: There may be a jammed sheet or multiple pages fed at once.

Solution:

1. Open the rear or front cover to access the paper path.

2. Carefully remove any jammed paper without tearing it.

3. Check for small pieces of torn paper.

4. Close all covers securely and press Resume to continue.

🔁 3 Blinks – Front Cover Open or Output Tray Issue

Cause: The output tray or paper output cover is open or not seated properly.

Solution:

1. Ensure the front cover is completely closed.

2. Reopen and close the output tray securely.

3. Press the Resume button to reset the warning.

🔁 4 Blinks – Ink Cartridge Not Recognized or Improperly Installed

Cause: Ink cartridge is missing, not seated properly, or incompatible.

Solution:

1. Open the cartridge compartment.

2. Remove and reinstall both black and color cartridges.

3. Make sure the cartridges click into place.

4. If the problem persists, replace the cartridge with a genuine Canon ink cartridge.

🔁 5 Blinks – Print Head Error

Cause: The print head is not installed correctly or is defective.

Solution:

1. Turn off the printer and unplug it.

2. Open the printer cover and check if the print head is seated properly.

3. Remove and reinstall the print head carefully.

4. If still blinking, the print head may need replacement.

5. Use Canon support to confirm compatibility and replacement process.

🔁 6 Blinks – Inner Cover Open or CD/DVD Tray Error

Cause: The inner cover (used for CD/DVD printing) is open during regular printing.

Solution:

1. Close the inner cover.

2. Ensure the tray is not inserted unless you're doing disc printing.

3. Press the Resume button to clear the alert.

🔁 7 Blinks – Ink Tank Not Installed Properly

Cause: One of the ink tanks isn’t recognized or is in the wrong slot.

Solution:

1. Check all ink tanks in the print head.

2. Remove and reinstall each tank.

3. Make sure tanks are in their correct color-coded slots.

4. Press Resume to see if the blinking stops.

🔁 8 Blinks – Ink Absorber Almost Full

Cause: The internal waste ink absorber is nearing its limit.

Solution:

1. This usually requires service.

2. Contact Canon support or take the printer to an authorized service center.

3. In some models, this can be temporarily reset via maintenance mode, but it’s not recommended unless done by a technician.

🔁 9 Blinks – Protective Material Not Removed or Other Hardware Error

Cause: There may be leftover packaging materials inside the printer, or a hardware fault has occurred.

Solution:

1. Turn off the printer and inspect the inside for orange tape or foam.

2. Remove any remaining packaging material.

3. If nothing is visible, perform a hard reset (unplug the printer for 5 minutes, then restart).

🔁 13 Blinks – Ink Level Unknown or Ink Out

Cause: The printer cannot detect the ink level, possibly due to refilled or third-party cartridges.

Solution:

1. Confirm cartridges are genuine Canon products.

2. Press and hold the Resume/Stop button for 5 seconds to override and continue printing.

3. Replace cartridges if issues persist.

🔁 14 or More Blinks – Cartridge or Sensor Error

Cause: Either the cartridge is incompatible, or there's a sensor malfunction.

Solution:

1. Replace the indicated cartridge.

2. Turn the printer off, unplug it, and wait 2 minutes before turning it back on.

3. If blinking continues, contact Canon support.

General Troubleshooting Steps

Regardless of the number of blinks, you should also try the following steps for canon printer orange light blinking +1-801-878-6858:

1. Restart Printer: Power off the printer, unplug it, wait a minute, then restart.

2. Check for Firmware Updates: Use Canon’s support site to update the printer firmware.

3. Use Canon Software Tools: Run Canon’s maintenance tools (e.g., Canon IJ Utility) to detect and fix issues.

4. Reset Printer Settings:

   1. Go to printer menu > Setup > Device Settings > Reset Settings

   2. Choose “Reset All” to return to factory settings.

When to Contact Canon Support

If the blinking light continues after all basic and advanced troubleshooting, contact Canon Printer Helpline, Canon Customer Service Number +1-801-878-6858, or Canon Printer Support Phone Number for further assistance.

Be ready to provide:

1. Your printer’s model number

2. Number of blinks observed

3. Error messages (if any)

4. Actions already taken

Conclusion

The Canon printer orange light blinking +1-801-878-6858 is a coded message indicating specific issues, from simple paper jams to complex print head or ink system errors. By counting the number of blinks and following the associated solution, you can often fix the issue on your own.

For more serious problems (like blinking 5, 8, or 14 times), Canon’s customer service +1-801-878-6858 can guide you through the next steps, including hardware service or replacement options. Knowing how to decode and respond to these blinking signals can save time, frustration, and money in the long run.